Linseed Oil- Raw or Boiled?

[No_Username]

I have just bought a bat and wanted to know whether it makes a difference if I use Boiled linseed oil or raw( whatever its called:D ).

1. Does it make a difference if the Linseed oil is raw or boiled?

I have only got boiled at the moment.

2.Does it make a difference if you knock in the bat after or before oiling?

3. How do you know that the bat is now knocked? 20:

Just don't want to do anything wrong with this bat as I have broken my previous bat which cracked after a year.

[No_Username]

I have just bought a new bat and wanted to know the following:

1. Does it make a difference if the Linseed oil is raw or boiled?

I have only got boiled at the moment.

2.Does it make a difference if you knock in the bat after or before oiling?

3. How do you know that the bat is now knocked? 20:

Just don't want to do anything wrong with this bat as I have broken my previous bat which cracked after a year.:afridi

[Waleedk11]

STOP! The purpose of oiling a bat is so the oil can soak in the bat making it have the right moisture for better play and lifespan. Boiled oil does not soak in so never use it on bats, instead it is used for polishing which is not what you need to do. Raw linseed oil always my friend, hope it helps :)

[Cover Drive]

1. Waleedk11 Bhai perfectly explained it :)
2. Not really but I would suggest oil before knocking.
3. Take a semi-old ball and bounce on the bat and see if you see seam marks, if you do then it means bat requires more knocking..

[hqmusik10]

yes i need the same question answered please

[ManHOOS]

http://www.pakpassion.net/ppforum/showthread.php?t=115787

see above hope it helps

[adill420]

I am new to this but based on the research I have done here is my response.

1. You have to put the oil as is. Do not boil the oil. Look in another thread, I posted where Bob Woolmer shows how to put oil on a bat and the quantity etc. It's a very helpful video.

2. Bat has to be knocked in after applying oil.

3. Honestly I do not know the correct answer to this so hopefully I will learn something as well.

[JN1301]

raw linseed oil or cricket bat oil. I have cricket bat oil. Anyway, the way i prepared my bat was apply 3 coats of oil with the last coat being a LIGHT coating ( i oiled the face and back of the bat avoiding the stickers). In between coats, you should leave the bat HORIZONTALLY for 24hours. If your bat has a polycoat face, then only apply oil to the back and let it sink in. Then i knocked in for around 8hours

[No_Username]

Making a thread in this section is a bit confusing:))

Some people told me that it doesn't make much diffference(boiled or raw). But does it damage the bat if you used boiled oil?

I am having a heart attack here.

[JN1301]

Making a thread in this section is a bit confusing:))

Some people told me that it doesn't make much diffference(boiled or raw). But does it damage the bat if you used boiled oil?

I am having a heart attack here. calm down, i assure you, boiled linseed oil will NOT damage your bat. Raw linseed oil is recommended over boil is because it stays moist for longer

[momin97]

do you have to oil a new bat?

[No_Username]

^for better performance, yes.

But not necessary.

[in_cutter]

do you have to oil a new bat?

Found this:



Bat Care



To get the best performance from your bat, there are certain procedures that manufacturers recommend and pitfalls to be avoided if possible. Bat willow is soft and light, but hardens when subjected mechanically to pressing rollers.

Naturally, because it is a soft wood the condition of the bat will deteriorate during usage. Bats can be seriously damaged by a Yorker i.e. when the ball is trapped between the bat and the ground, causing the willow to split diagonally at the toe. If the ball strikes the edge of the bat with sufficient force, heavy impact damage may occur.

Water penetrating the toe may cause the pressing to lift and if action is not taken immediately, the toe can be easily damaged by striking the ball or simply by heavy tapping at the crease. Some small cracks are bound to occur on the bat, due to wear and tear, but these will not affect its performance. Willow quickly takes up and releases moisture.

If a bat is stored in warm or hot conditions it will dry out, making the wood brittle and prone to damage. LIGHT applications of raw linseed oil every two to three weeks help prevent this and should be carried out throughout the bat's life. Exceptions are covered bats which can be kept clean simply by wiping the blade.

They may be oiled if the covers are completely or partially removed. AVOID over-oiling, which adds to the bat's weight, spoils its driving power and may cause "wood rot." Another major problem is the use of CHEAP BALLS, which are less resilient. This is false economy. Top quality balls are expensive for a reason.

Using cheap balls will damage your bat in a very short time, so only use balls of reputable make. Bats may also be damaged if they are not properly played in when new. It is better to use old leather balls whilst carrying out this process, if possible. Finally, even the best player sometimes misses his shot and this can't be helped. However, continual badly missed shots will eventually cause especial damage to the edges, toe and shoulders of the bat.
So, to summarise:
Knock in your bat when new.
Keep it oiled where necessary, but don't over-oil.
Store it in the correct environment.
Don't expose the base of the bat to prolonged dampness.
Don't continue playing with a damaged bat.
Don't use cheap balls - buy the most expensive you can afford.
Don't mis-use your bat in the dressing room or at the nets. You probably know what I mean!
LOOK AFTER YOUR BAT AND IT WILL LOOK AFTER YOU!

[momin97]

thank you very much ^^^ if a bat is rough does it mean its dried and needs oil?

[in_cutter]

thank you very much ^^^ if a bat is rough does it mean its dried and needs oil?

Sand it down lightly, then oil it.

[Cover Drive]

Yes.

[No_Username]

How does Bat tape benifit the bat?

[No_Username]

^Answer would be appreciatted:)

[No_Username]

Help would be appreciatted :pissed:

[Quick Single]

Uhm, I'm not quite sure but I think it's just to cover the cracks and help them to stop growing larger.

[JN1301]

yes, it is too cover cracks and stop them growing larger but its also used to prevent cracks from happening in the first place.

[Cover Drive]

It also reduces the ball impact.

[johng]

calm down, i assure you, boiled linseed oil will NOT damage your bat. Raw linseed oil is recommended over boil is because it stays moist for longer Exactly raw is better but boiled is ok and will not damage your bat.

[No_Username]

Do you have to tape all around the bat(360degrees) or is it ok if you just do it on the face of the bat?

[Cover Drive]

Which tape are you talking about?

[Quick Single]

Nah only if you have cracks on the back of the bat, otherwise you can just put it on the face,

[No_Username]

Which tape are you talking about?



Bat tape, what else?:))

Nah only if you have cracks on the back of the bat, otherwise you can just put it on the face,

Okay, thanks.

[Quick Single]

Bat tape, what else?:))
.

You'd be surprised at how many Desi's put on cricket ball tape or duct tape on there bats. :))

[No_Username]

You'd be surprised at how many Desi's put on cricket ball tape or duct tape on there bats. :))

I know, but I mentioned bat tape just a few posts ago,yet he struggled to understand. :)